NOVEX P-100
NOVEX P-100 – Water Reducing & Waterproofing Concrete Admixture
NOVEX P-100 is a high-performance liquid concrete admixture specially formulated to reduce water demand and improve the water resistance, workability, strength and durability of cement-based concrete and mortar.
It helps disperse cement particles more effectively, allowing the required workability to be achieved with reduced mixing water. At the same time, its waterproofing components help reduce capillary water absorption and improve resistance against moisture penetration.
Key Advantages:
-Reduces water requirement in concrete and mortar
-Improves concrete workability and finishing
-Helps increase compressive strength
-Reduces capillary water absorption
-Improves resistance to moisture penetration
-Enhances concrete durability
-Helps produce denser and more cohesive concrete
-Suitable for reinforced and general-purpose concrete
-Can be used in foundations, columns, beams, slabs and other concrete structures
- Applications / Uses:
NOVEX P-100 can be used in a wide range of cement-based construction applications, including:
– RCC concrete
– Footing and foundation concrete
– Column and beam concrete
– Roof slab concrete
– Piling-related concrete works
– Concrete repair works
– Cement mortar
– Brickwork and masonry
– Blockwork
– Plastering and rendering
– Floor screeding
– Bathroom and wet-area construction
– Roof and terrace construction
– Selected waterproofing applications
– General civil construction works
How NOVEX P-100 Works
When added to a properly proportioned cementitious mix, NOVEX P-100 helps improve the efficiency of the cement-water system.
It helps the concrete or mortar achieve better workability with controlled water content. This can support improved compaction and a denser cementitious matrix.
Better workability + controlled water content + improved compaction = stronger and more durable concrete performance.
Actual performance depends on cement type, aggregate characteristics, mix design, water-cement ratio, curing conditions and dosage.
—
Application Method
Step 1 – Prepare the Concrete/Mortar Mix
Prepare cement, sand and aggregate according to the required mix design.
Step 2 – Dilute/Add NOVEX P-100
NOVEX P-100 should preferably be diluted with a portion of the required mixing water or added according to the recommended site procedure.
Step 3 – Mix Thoroughly
Ensure adequate mixing so that the admixture is distributed uniformly throughout the concrete or mortar.
Step 4 – Place & Compact
Place the concrete or mortar properly and ensure adequate compaction to minimize voids and honeycombing.
Step 5 – Proper Curing
Proper curing is essential to achieve the desired strength and durability of concrete.
«Important: The optimum dosage should be established through trial mixes based on cement type, concrete grade, required workability and site conditions.»
—
Advantages at a Glance
✓ Improved concrete strength potential
✓ Reduced water requirement
✓ Better workability
✓ Improved compaction
✓ Reduced permeability
✓ Better moisture resistance
✓ Enhanced durability
✓ Suitable for concrete & mortar
✓ Easy to incorporate into construction mixes
✓ Suitable for new construction and repair works
—
Compatibility
NOVEX P-100 is intended for use with commonly used cementitious construction materials. However, compatibility may vary depending on the type and brand of cement, supplementary cementitious materials, aggregates and other admixtures.
When used together with other chemical admixtures, compatibility testing and trial mixing are recommended before large-scale application.
—
Precautions
– Do not exceed the recommended dosage without proper trial testing.
– Do not add uncontrolled extra water to compensate for workability.
– Ensure proper mixing and uniform distribution of the product.
– Use clean mixing water.
– Follow proper concrete mix design and placement procedures.
– Adequate curing is essential for optimum concrete performance.
– Keep the product away from children.
– Avoid contact with eyes and prolonged contact with skin.
– Use appropriate PPE during handling and application.
– Refer to the product TDS/SDS for detailed technical and safety information.
—
Packaging
NOVEX P-100 is available in suitable packaging options for construction projects and site requirements.
Available Packaging:
1 L • 5KG• 10 KG • 20 KG •220 KG • Bulk Packaging
Packaging availability may vary. Please contact CHEMFIX for current pack sizes.
—
Storage
Store in a cool, dry and shaded place, away from direct sunlight and extreme temperatures.
– Keep the container tightly closed when not in use.
– Protect from contamination.
– Do not allow the product to freeze.
– Store in the original container.
– Follow the recommended storage conditions mentioned in the product TDS/SDS.
—
- Why Choose NOVEX P-100?
- NOVEX P-100 ensures stronger construction, better protection, and longer-lasting performance. Its versatile nature makes it a reliable choice for engineers, contractors, and homeowners seeking quality and durability in every project.